113-Resistant Topcoat Water-Based Oil Paint

Mix thoroughly before use. Dilute with synthetic thinner at a rate of 5-10% and apply with a brush or roller. Completely clean any oil, dirt, and old peeling paint from the surface to be painted. Ensure the surface is free of moisture. For metal surfaces, apply Tek Anti-Rust Paint and wait 12 hours before applying Semi-Matte Satin Paint. For wall surfaces, prime with Tek Synthetic Primer, sand after 1 day, remove dust from the surface, and then apply Semi-Matte Satin Paint. Application Temperature: +5 to +30 °C. Drying Time: At 25 °C; touch dry 1-2 hours, dust-free 3-4 hours, fully dry 10-18 hours. Coverage: 1 liter of paint can cover 12-16 m² depending on the surface and colors, and 1 kg can cover 8-12 m² at a dry film thickness of 25±5 microns.

Packaging Types: 15 - 3.75 - 0.75 L Colors: White Transport and Storage Information: Can be stored in its original unopened packaging for at least 2 years. Keep away from direct sunlight, high temperatures, and extreme cold. Safety Warnings: R10 Flammable R66 May cause dryness and cracking of skin R67 Vapors may cause drowsiness and dizziness S2 Keep out of reach of children S7 Keep container tightly closed S9 Keep container in a well-ventilated area S16 Keep away from ignition sources, do not smoke S23 Do not inhale vapors S24 Avoid contact with skin S25 Avoid contact with eyes S26 In case of contact with eyes, rinse thoroughly with water and seek medical advice S28 In case of contact with skin, rinse thoroughly with water immediately S29 Do not discharge into sewers S37 Wear suitable protective gloves, S39 Wear protective goggles/mask S46 If swallowed, seek medical advice immediately and show container or label S51 Use only in a well-ventilated area. Chemical Properties: Density 1.35 ± 0.05 Viscosity 110 ± 10 ku Solid content % 65 ± 5% Gloss 15 - 50 Gloss (60° angle)